 |
||||||||
Primarily Dry or Indoor Areas |
||||||||
Metal Clad (Type MC Series) Cable Connector
|
The (NWT) connector series is to be used when bringing your cable into a knockout box. The connector is easily installed by screwing the one piece body onto the metal sheath and installing it through a knockout hole while securing the connector with the enclosed locknut and bushing. |
The (NWTU) connector series is designed to bring the cable into a threaded entrance (such as a switch gear or a motor housing). This connector is easily installed by screwing the body onto the metal sheath, screwing the male hub into the threaded entrance, and tightening the hub nut. |
Both of these connectors are designed for indoor use where they are not subject to water spray or other wet conditions. As with all PER FIT® connectors the 360° contact between the connector and the sheath virtually eliminates the possibility of cable pullout, and assures effective bonding of the cable to the box or enclosure. All connectors are stocked in copper-free aluminum. They are also available in brass, nickel plated aluminum, and 303, 304, and 316 stainless steel for special applications. For extra corrosive areas, pre-cut lengths of heat shrink are available. |